IllumScience · KS3 · GCSE physics
Electricity and circuits
Trace current, compare series and parallel circuits and apply V = IR.
18 minutes suggested · original learning material · no exam-grade prediction
What you will practise
- Explain current and potential difference
- Compare series and parallel rules
- Calculate resistance safely from low-voltage evidence
Understand the idea
Current is the rate of flow of charge, measured in amperes (A). Potential difference is energy transferred per unit charge, measured in volts (V). Current is not used up by a lamp; energy is transferred.
In a series circuit there is one complete path, so current is the same through each component. The supply potential difference is shared between components.
In parallel, branches provide separate paths. Potential difference is the same across each branch connected to the supply; total current is the sum of branch currents.
Resistance = potential difference ÷ current, or V = IR. For an ohmic conductor at constant temperature, current is proportional to potential difference.
Connect an ammeter in series and a voltmeter in parallel across a component. This lesson uses diagrams and calculations only. Never experiment with mains electricity; practical work needs approved low-voltage equipment and supervision.
Walk through the reasoning
Worked example
A resistor has a potential difference of 6 V and a current of 0.5 A. Find its resistance.
- Choose R = V ÷ I.
- Substitute consistent units: R = 6 V ÷ 0.5 A.
- 6 ÷ 0.5 = 12.
- State the unit: ohms (Ω). Check 0.5 A × 12 Ω = 6 V.
12 Ω
Try · understand · retry
Check your understanding
Practise four questions from this 8-question bank, then read the explanations. Another set prioritises questions outside your last set when available in this visit.
Loading saved work…